Applications
- Straddling or hanging sand control liners across productive intervals
- Tubing Patch
- Pump Seating Nipple for slim hole completions
- Down Hole Choke for injection or production independent of nipples
- Production Packer c/w optional Tie Back to surface
- Gravel Packing configured for:
- One trip circulating gravel packs
- One trip squeeze gravel packs
Benefits
- Completely retrievable
- Adaptable to Primary or Thermal Seals
- Primary Seal rated to 10,000 Psi.
- Thermal Seal rated to 6000 F at 2,500 Psi.
- Simple, short design accomodates for hole deviation.
- Ratchet rings maintain seal stress as well as positive slip setting force
- Field adjustable shear setting
- Robust Collet type slips w/ retainers for secure run in
- Drill in ready, capable of rotating liners into place when required
- Can be installed below restriction (nipples)
- One piece mandrel increases strength and pressure integrity
- Engineered for conventional, hazardous or thermal applications
- Can be installed and retrieved by wireline, coiled tubing or jointed pipe
The retrievable liner top packer is suitable for a wide variety of through tubing applications. Designed for operation in conventional, extreme, high pressure and thermal environments up to 600 Degree F, the tool has been engineered for the most extreme deviated and undulated vertical and horizontal well applications.
Our proprietary design offers full 360 Degree tubing contact with ‘state of the art’ durability, pressure maintenance and hanging/compression capacity. Our unique dual collet slip design offers bi-directional pressure and force maintenance while a one piece inner mandrel provides upper and inner bore sealing, eliminating the need for PBR or setting sleeve integral seals when used with our Tie Back Nipple.
Designed with simple operation in mind, zero set down weight is required for setting, while a single downward movement engages the soft release allowing slips and seal mechanisms to release for easy extraction out of the well.
Wire Line Set
An available conversion kit allows the ProFrac Running and Setting tool shear stud to release from the setting tool and adapter kit, converting the to a conventional electric line setting tool.
Coil Tubing & Jointed Pipe
ProFrac Running and Setting tool are used to set the Packer. On retrieval, a soft release extension is supplied which is threaded to the ProFrac Running and Setting tool. Stabbing into the tool shears the soft release mechanism for easy pull and release with a secondary shear release.